Showing 1–12 of 15 results
Its operating weight (including the cab) is 13300kg, with the weight distribution of the steel wheels being 6900kg at the front and 6400kg at the rear. The overall length of the machine (without a tow hook) is 4540mm, and the total width is 2135mm. The travel speed in the first gear is 0-5.7km/h, and in…
CC4.0 Double Drum Vibratory Roller: The operating weight is 3378kg, the standard compaction width is 1300mm, and the total power is 36.6kW. This model is equipped with 800mm steel drums. It can be used simply as a vibratory roller in small-scale operations and as an auxiliary roller for high-production rollers in large-scale operations. It has…
Power System Engine: Optional Cummins 6BT 5.9 (113kW) or Deutz F6L 912, meeting Tier 2 or Tier 3 emission standards. Operating Weight: The basic model is 9.75 tons, with a maximum of 12.1 tons. The compaction capacity can be enhanced by adding counterweights. Compaction Performance: The vibrating wheel width is 2130mm, the exciting force is…
Performance Characteristics Strong Compaction Capacity: Adopting 67Hz high-frequency and low-amplitude vibration technology, each steel wheel can strike the material more than 4,000 times per minute, which can greatly enhance the compactness of the road without breaking the aggregates, ensuring the anti-skid performance of the road surface. Soft Start and Stop Operation: The unique soft start…
Basic parameters: The maximum operating weight is 5250kg, the axle load (front/rear) is 2255/1795kg, the static linear load at the front is 16.3kg/cm, the rear tire size is 10.5/80-16, and the number of tires is 4. The total length of the equipment is 2965mm, the total width is 1506mm, the total height including the cab…
Basic parameters: The operating weight including the cab is 13820kg, and the maximum operating weight is 14610kg. The total length is 5010mm, the total height including the cab is 3220mm, the total width including the cab is 2250mm, and the wheelbase is 3610mm. – Steel wheel parameters: The width of the front/rear steel wheels is…
Working weight: 16,000 kg, with the front wheel allocated weight being approximately 16 tons and the rear wheel allocated weight about 11 tons, plus a counterweight of 4,000 kg and water weight of 650 kg. Overall dimensions (length Ă— width Ă— height) are 4770 Ă— 2210 Ă— 3442 mm, compaction width is 2055 mm, wheelbase…
Basic parameters: The operating weight is 10000kg, with the front and rear wheels each distributing 5000kg. The engine model is DEUTZ BF4M2012-10T3R, with a rated power of 74.9kW and a rated speed of 2300r/min. – Compaction performance: There are two vibration frequencies, 48Hz and 45Hz; the nominal amplitudes are 0.40mm and 0.80mm; the exciting force…
Basic parameters: Maximum working mass 30300kg, rated power 132kW, engine model is Shangchai SC7H180.2G3. Its compaction width is 2750mm, the number of tires is 5 at the front and 6 at the rear, the minimum turning radius (outer side) is 7820mm, the minimum ground clearance is 300mm, and the overall dimensions are 4925mm Ă— 2851mm…
Power Configuration: Engine: Deutz BF4M1013EC (111kW/2300rpm) or Cummins QSB4.5 (113kW/2200rpm), meeting National III / Euro IV emission standards. Fuel Economy: Theoretical fuel consumption is 222g/kWăƒ»h. Calculated at 111kW power, the hourly fuel consumption is approximately 24.6L. The fuel tank capacity is 240L, enabling continuous operation for nearly 10 hours. Compaction Performance: Operating weight: 14 tons…
Vibration frequency: 28/33Hz (dual-frequency design, switchable between high-frequency/low-frequency modes) Nominal amplitude: 1.9/0.95mm (corresponding to high frequency/low frequency) Vibration force: 290/200kN (greater vibration force at high frequency, suitable for deep compaction; smaller vibration force at low frequency, suitable for surface leveling) Static linear load: 376N/cm (static pressure per unit length of wheel width, reflecting compaction strength)…
Basic parameters: The total operating weight of the machine is 18,000 kg, with the vibrating wheel distributing 9,000 kg, the drive axle distributing 9,000 kg, and the static linear load of the front wheel being 422 N/cm. The engine model is SC7H160.2G3, with a rated power of 118 kW (at 1800 r/min). – Compaction mechanism…
No products in the cart.
