Showing all 9 results
Working weight: 16,000 kg, with the front wheel allocated weight being approximately 16 tons and the rear wheel allocated weight about 11 tons, plus a counterweight of 4,000 kg and water weight of 650 kg. Overall dimensions (length Ă— width Ă— height) are 4770 Ă— 2210 Ă— 3442 mm, compaction width is 2055 mm, wheelbase…
Basic parameters: The operating weight is 10000kg, with the front and rear wheels each distributing 5000kg. The engine model is DEUTZ BF4M2012-10T3R, with a rated power of 74.9kW and a rated speed of 2300r/min. – Compaction performance: There are two vibration frequencies, 48Hz and 45Hz; the nominal amplitudes are 0.40mm and 0.80mm; the exciting force…
Basic parameters: Maximum working mass 30300kg, rated power 132kW, engine model is Shangchai SC7H180.2G3. Its compaction width is 2750mm, the number of tires is 5 at the front and 6 at the rear, the minimum turning radius (outer side) is 7820mm, the minimum ground clearance is 300mm, and the overall dimensions are 4925mm Ă— 2851mm…
Power Configuration: Engine: Deutz BF4M1013EC (111kW/2300rpm) or Cummins QSB4.5 (113kW/2200rpm), meeting National III / Euro IV emission standards. Fuel Economy: Theoretical fuel consumption is 222g/kWăƒ»h. Calculated at 111kW power, the hourly fuel consumption is approximately 24.6L. The fuel tank capacity is 240L, enabling continuous operation for nearly 10 hours. Compaction Performance: Operating weight: 14 tons…
Vibration frequency: 28/33Hz (dual-frequency design, switchable between high-frequency/low-frequency modes) Nominal amplitude: 1.9/0.95mm (corresponding to high frequency/low frequency) Vibration force: 290/200kN (greater vibration force at high frequency, suitable for deep compaction; smaller vibration force at low frequency, suitable for surface leveling) Static linear load: 376N/cm (static pressure per unit length of wheel width, reflecting compaction strength)…
Basic parameters: The total operating weight of the machine is 18,000 kg, with the vibrating wheel distributing 9,000 kg, the drive axle distributing 9,000 kg, and the static linear load of the front wheel being 422 N/cm. The engine model is SC7H160.2G3, with a rated power of 118 kW (at 1800 r/min). – Compaction mechanism…
Basic parameters: The total operating weight of the machine is 20000kg, with the vibrating wheel distributing 10000kg and the drive axle distributing 10000kg. The engine model is SC7H175.2G3, with a rated power of 128kW and a rated speed of 1800r/min. – Compaction mechanism parameters: Vibration frequency is 28/33Hz, rated amplitude is 1.9/0.95mm, excitation force is…
Basic parameters: The operating weight is 22,000 kg, with both the vibrating wheel distributed mass and the drive axle/wheel distributed mass being 11,000 kg, and the static linear load of the front wheels is 516 N/cm. The overall dimensions are 6220 Ă— 2430 Ă— 3200 mm, with a wheelbase of 3180 mm and a minimum…
Basic parameters: The total operating mass of the machine is 26000kg, the distributed mass of the vibrating wheel is 13000kg, the distributed mass of the driving wheel is 13000kg, and the static linear load of the vibrating wheel is 582N/cm. – Engine parameters: The engine model is SC7H190.2G3 or SC8D190.3G2, with a rated power of…
No products in the cart.
