Showing 205–216 of 220 results
Basic Parameters – Engine: Usually equipped with the Deutz BF6M1013ECP engine, with a power of 150kW/2000rpm and a fuel tank capacity of 300L. Some models are also equipped with the Shangchai SC9DK engine, with a power of 162kW/2000rpm. – Paving capacity: Maximum paving width of 10.5m, maximum paving thickness of 350mm (up to 500mm for…
Basic parameters: The operating weight is 10000kg, with the front and rear wheels each distributing 5000kg. The engine model is DEUTZ BF4M2012-10T3R, with a rated power of 74.9kW and a rated speed of 2300r/min. – Compaction performance: There are two vibration frequencies, 48Hz and 45Hz; the nominal amplitudes are 0.40mm and 0.80mm; the exciting force…
Comfort: Equipped with a fresh air conditioning system to ensure a suitable temperature in the cab. The cab is fitted with large-area high-strength tempered glass, providing excellent visibility, and is also equipped with overhead lights for convenient nighttime operations. The seats have been upgraded with 20% thicker cushions for more comfortable seating.
– Easy maintenance: Routine maintenance of engine oil, fuel, and air filters can be performed simply by opening the rear hood, making daily maintenance very convenient.
– Application fields: Suitable for various earthwork construction projects such as municipal construction, highway and bridge construction, housing construction, road engineering, farmland water conservancy construction, and port construction.
Basic parameters: Maximum working mass 30300kg, rated power 132kW, engine model is Shangchai SC7H180.2G3. Its compaction width is 2750mm, the number of tires is 5 at the front and 6 at the rear, the minimum turning radius (outer side) is 7820mm, the minimum ground clearance is 300mm, and the overall dimensions are 4925mm × 2851mm…
Power Configuration: Engine: Deutz BF4M1013EC (111kW/2300rpm) or Cummins QSB4.5 (113kW/2200rpm), meeting National III / Euro IV emission standards. Fuel Economy: Theoretical fuel consumption is 222g/kW・h. Calculated at 111kW power, the hourly fuel consumption is approximately 24.6L. The fuel tank capacity is 240L, enabling continuous operation for nearly 10 hours. Compaction Performance: Operating weight: 14 tons…
Vibration frequency: 28/33Hz (dual-frequency design, switchable between high-frequency/low-frequency modes) Nominal amplitude: 1.9/0.95mm (corresponding to high frequency/low frequency) Vibration force: 290/200kN (greater vibration force at high frequency, suitable for deep compaction; smaller vibration force at low frequency, suitable for surface leveling) Static linear load: 376N/cm (static pressure per unit length of wheel width, reflecting compaction strength)…
Basic parameters: The total operating weight of the machine is 18,000 kg, with the vibrating wheel distributing 9,000 kg, the drive axle distributing 9,000 kg, and the static linear load of the front wheel being 422 N/cm. The engine model is SC7H160.2G3, with a rated power of 118 kW (at 1800 r/min). – Compaction mechanism…
Basic parameters: The total operating weight of the machine is 20000kg, with the vibrating wheel distributing 10000kg and the drive axle distributing 10000kg. The engine model is SC7H175.2G3, with a rated power of 128kW and a rated speed of 1800r/min. – Compaction mechanism parameters: Vibration frequency is 28/33Hz, rated amplitude is 1.9/0.95mm, excitation force is…
Basic parameters: The operating weight is 22,000 kg, with both the vibrating wheel distributed mass and the drive axle/wheel distributed mass being 11,000 kg, and the static linear load of the front wheels is 516 N/cm. The overall dimensions are 6220 × 2430 × 3200 mm, with a wheelbase of 3180 mm and a minimum…
Basic parameters: The total operating mass of the machine is 26000kg, the distributed mass of the vibrating wheel is 13000kg, the distributed mass of the driving wheel is 13000kg, and the static linear load of the vibrating wheel is 582N/cm. – Engine parameters: The engine model is SC7H190.2G3 or SC8D190.3G2, with a rated power of…
Reasonable structural design: The air intake system features three-stage filtration, which can adapt to harsh dust conditions. It comes standard with an extended and reinforced chassis, with the four wheels and related components made of reinforced materials. The key parts of the working device are designed with reinforcement, improving the stability and service life of the equipment under harsh working conditions such as mines.
– Comfortable operation: A new streamlined driving space design, with car-level luxurious interior and wide field of vision. High-performance silicone oil spring shock absorbers are adopted to effectively isolate external impacts and enhance riding comfort.
Hydraulic system: Some models, such as the C75, adopt a three-pump confluence hydraulic system, which increases work efficiency by 15% and saves energy and fuel. The B75ECO and other models are equipped with a multi-functional hydraulic system, enabling flexible execution of various actions.
– Comfort and safety: The cab is equipped with heating and cooling air conditioning, speakers, LCD screens, etc. Some models, such as the C75MECO, come standard with front and rear imaging systems. Additionally, some models use hydraulic disc brakes, ensuring reliable braking.
No products in the cart.
